Charging Modes
The meaning of the value of the event type CHARGING_MODE differs due to selected Source type. This means for example the CHARGING_MODE value 5 for a CAR_CHARGER means "Minimal and Solar" where as the CHARGING_MODE value 5 for a HEAT_PUMP means "noControl".
Car
Event type: CHARGING_MODE
Source type: CAR_CHARGER
Charging Mode
Below are the charging modes which can be set for a EV Charger to describe how the car currently will be charged.
| ID | Mode | Description |
|---|---|---|
0 | Fast charge | Charge with maximum possible power. |
1 | Only solar | Only charge if sufficient solar power is available. The power is regulated depending on the available solar power. |
2 | Solar and tariff optimized | Charge during the day if sufficient solar power is available. If the battery is not full at the start of low tariff hours, charging occurs with maximum possible power. |
3 | Do not charge | Do not charge the car. |
4 | Constant current | Charge with a constant current. |
5 | Minimal and solar | Charges with a minimum current (mostly 6A and single-phase, if supported). If there is a solar power surplus, this is used on top. |
6 | Minimum charge quantity | Charge minimum quantity |
7 | Charging Target (%) | Charge until target percentage is reached |
Battery
Event type: CHARGING_MODE
Source type: BATTERY
Charging Mode
Below are the charging modes which can be set for a BATTERY to describe how the BATTERY currently will be charged.
| ID | Mode |
|---|---|
0 | Passive |
1 | Active |
2 | Charge |
3 | Discharge |
4 | OFF |
Heat Pump
Event type: CHARGING_MODE
Source type: HEAT_PUMP
Charging Mode
Below are the charging modes which can be set for a HEAT_PUMP to describe how the HEAT_PUMP currently will be charged.
| ID | Mode |
|---|---|
0 | No Mode |
1 | ON |
2 | OFF |
3 | Only Solar |
4 | Solar & Tariff optimized |
5 | No Control |
Last updated